RF I/O SW922

Features/Options

  • Thermoplastic enclosure
  • sWave® wireless technology
  • No wiring and pipe laying required
  • Power supply by Lithium battery
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • The RF I/O may be used in combination with wireless inductive sensor RF IS
  • Connection of external switching contact (potentialfree contact) with gold contacts possible.
  • Delivery does not include protective caps.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureABS (Acrylnitril-Butadien-Styrol)
Connection4 x Plug-in connector M12 x 1, 4-pole
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Switching frequencymax. 5 Hz
Standby current60 µA
Voltage supplyLithium battery Tadiran SL-760; system Li/SOCl2;
(replaceable)
Nominal voltage3.6 V
Capacity2.2 Ah
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth400 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Battery lifedepending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days; for 1000 transfers/day and one mechanical switch approx. 1400 days
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002
 
NoteTransmission of battery voltage; status signal: individually adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s
Ordering details
Type   Material no.
RF I/O SW922-4E-2,2Ah on request Produced to order.
Accessories