RF I/O SW922 Vcc extern

Features/Options

  • Thermoplastic enclosure
  • sWave® wireless technology
  • 4 connectors: for the use with wireless sensors, series RF, 3-wire PNP sensors 24 VDC and/or external NO contacts with gold contacts
  • No wiring and pipe laying required
  • External power supply via M12 female plug-in connector
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Note
  • Delivery does not include protective caps.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -3,
EN 61000-4-2, -20, -4, -5, -6;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureABS (Acrylnitril-Butadien-Styrol)
ConnectionSensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 female plug-in connector
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesmax. 1440 telegrams/h
Switching frequencymax. 5 Hz
Rated operating voltage range UB18 - 30 VDC Pin 1 and Pin 3 connector M12
Rated operating isolation voltage Ui75 VDC
Uimp500 V
Rated operating current Ie2.5 mA
Voltage drop Ue Ua- 3.5 V with 4 x 50 mA sensor current
Max. load current per sensor connection50 mA
Switching point E1 - E4> 5 VDC
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth400 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002
Notestatus signal: individually adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s
Ordering details
Type   Material no.
RF I/O SW922-4E-Vcc-ext on request Produced to order.
Accessories