RF 96 ST SW915

Features/Options

  • Thermoplastic enclosure
  • Mounting details to EN 50047
  • Plug-in connector M12
  • sWave® wireless technology
  • No wiring and pipe laying required
  • Power supply by Lithium battery
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
  • Available with "LBT - Listen before Talk" Software
Notes
  • The RF 96 ST may be used in combination with wireless inductive sensor RF IS
  • Connection of external switching contact (potentialfree contact) with gold contacts possible.

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosureglass-fibre reinforced, shock-proof thermoplastic (PA 66), self-extinguishing UL 94-V0
Tightening torqueM4 mounting screw enclosure: max 1.2 Nm,
M2.5 cover screws: approx. 0.45 Nm
ConnectionPlug-in connector M12 x 1, 4-pole
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–20 °C … +65 °C
Operation cyclesapprox. 12000 telegrams at repetitions/h
Switching frequencymax. 5 Hz
Standby current15 µA
Voltage supplyLithium battery SL 2770 (replaceable)
Capacity8.5 Ah
Frequency915 MHz (USA, Canada and Mexico)
Transmission power< 10 mW
Data rate66 kbps
Channel bandwidth550 kHz
Wireless rangemax. 450 m outside,
max. 40 m inside
Battery life SL-2770 (C)according to switching frequency,
1 s approx. 780 days,
10 s approx. 1300 days,
100 s approx. 1400 days
Actuating timemin. 80 ms
NoteStatus signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
Delivery state: jumper position without status signal
Transmission of battery voltage and switching condition
ApprovalsUSA: FCC: XK5-RFRXSW915;
Canada: IC: 5158A-RFRXSW915;
Mexico: IFT/223/UCS/DG-AUSE/6773/2017
Ordering details
Type code
Type   Material no.
RF 96 ST SW915 1207474
Type   Material no.
RF 96 ST SW915 LBT on request Produced to order.