RF RC M30 SW922

Features/Options

  • Thermoplastic or stainless steel enclosure
  • RF RC M30 … : Sensor with reed contact
  • RF GS M30 … : Sensor based on GMR effect - on request
  • RF HS M30 … : Sensor with Hall sensor - on request
  • sWave® wireless technology
  • Power supply by Lithium battery
  • No wiring and pipe laying required
  • Easy programming of receiver
  • Output signal can be individually configurated at the receiver
Notes
  • 2 mounting nuts are included in delivery
  • The actuator is not included in the delivery of the switches

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
EnclosureStainless steel 1.4539 or PVC-C
Type of installationflush, in not ferromagnetic material
Degree of protectionIP 67 to IEC/EN 60529
ProtocolsWave®
Ambient temperature–25 °C … +65 °C
Switching systemReed contact MK17, GMR sensor or
Hall element
Switching distanceM 100: sn > 15 mm;
M 100: sa 0 … 12,15 mm
M 30 Niro: sn > 30 mm;
M 30 Niro: sa 0 … 24,3 mm
Hysteresis< 1 mm
Operation cyclesmax. 1440 telegrams/h
Voltage supplyLithium-battery CR 2032 (replaceable)
Current absorptionwithout transmissions: Reed contact: approx. 1 μA;
GMR sensor: <5 μA;
Hall sensor: <10 μA
Capacityapprox. 240 mAh
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth400 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Mechanical life> 1 million operations
Battery lifeapprox. 10 years unused,
Reed switch: approx. 6 years with 1 actuation per min.,
Hall sensor: approx. 6 years with 1 actuation per min.
Actuating timemin. 80 ms
Approvals Japan: ARIB STD-T108: 204-610002
Ordering details

Stainless steel enclosure

Reed contact

Type   Material no.
RF RC M30 SW922 NIRO on request Produced to order.

Thermoplastic enclosure

Reed contact

Type   Material no.
RF RC M30 SW922 KST on request Produced to order.
Actuators
Type   Material no.
Magnet M 30 NIRO 1189024
Type   Material no.
Magnet M 100 N 1042609
Accessories