Wireless receiver RF Rx EN868-NPN 24 VDC

Wireless receiver
Material number: 1182581(Material number old: 90590002)

Product image

 

Dimensions

Downloads

» Data sheet
PDF | 24.04.2018

» EC-Declaration of Conformity
PDF | 793 KB | 20.07.2016

» Mounting and wiring instructions
PDF | 2 MB | 17.03.2017

» STEP-File
ZIP | 181 KB | 20.03.2017

Technical data

StandardsEN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20, -4-4, -4-5, -4-6;
EN 60068-2-6, EN 60068-2-27;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Number of channels1
MountingDIN rail mounting
Connectionterminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Degree of protectionIP 20 to IEC/EN 60529
Inputs1 wireless channel, max. 10 transmitters per channel
OutputNPN (transistor)
Rated operating current IeInput: max. 0.08 A ;
output: 0.2 A
Rated operating voltage UeInput: 24 VDC -15 % … +10 %;
output: UB-2.5 VDC
Ie/Ue of output contacts6 A/250 VAC; 2 A/24 VDC
Utilisation categoryDC-13
Ui250 VAC
Uimp2.5 kV
Frequency868.3 MHz
Displaygreen LED: operating state,
orange LED: switching conditions
Operation cyclesapprox. 9000 telegrams at repetitions/h
Degree of pollution2 to IEC/EN 60664-1
Ambient temperature0 °C … +55 °C
Storage and shipping temperature–25 °C … +85 °C
Vibration resistanceNO contact 20 g, NC contact 5 g
External antennaalways required for optimum wireless range
NoteInductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Weight56 g

Arrangement of receiver and switch antenna

Optimum    Possible       Unsuitable

mounting    mounting     mounting


Note

Magnetic base antennae must be mounted on a
metal plate of min. 250 x 250 mm size.